Create a Linode account to try this guide with a $ credit.
This credit will be applied to any valid services used during your first  days.

Ruby on Rails is a server-side web application framework that allows web designers and developers to implement dynamic, fully featured web applications.

Deploying a Marketplace App

The Linode Marketplace lets you easily deploy software on a Compute Instance using Cloud Manager. See Get Started with Marketplace Apps for complete steps.

  1. Log in to Cloud Manager and select the Marketplace link from the left navigation menu. This displays the Linode Create page with the Marketplace tab pre-selected.

  2. Under the Select App section, select the app you would like to deploy.

  3. Complete the form by following the steps and advice within the Creating a Compute Instance guide. Depending on the Marketplace App you selected, there may be additional configuration options available. See the Configuration Options section below for compatible distributions, recommended plans, and any additional configuration options available for this Marketplace App.

  4. Click the Create Linode button. Once the Compute Instance has been provisioned and has fully powered on, wait for the software installation to complete. If the instance is powered off or restarted before this time, the software installation will likely fail.

To verify that the app has been fully installed, see Get Started with Marketplace Apps > Verify Installation. Once installed, follow the instructions within the Getting Started After Deployment section to access the application and start using it.

Note
Estimated deployment time: Ruby on Rails should be fully installed within 2-5 minutes after the Compute Instance has finished provisioning.

Configuration Options

  • Supported distributions: Ubuntu 20.04 LTS
  • Recommended minimum plan: All plan types and sizes can be used.

Ruby on Rails Options

  • Rails Application name (required): The name for your rails application.

Getting Started after Deployment

Access Ruby on Rails

After Ruby on Rails has finished installing, you will be able to access Ruby on Rails from the console via ssh with your Linode’s IPv4 address:

  1. SSH into your Linode and create a limited user account.

  2. Log out and log back in as your limited user account.

  3. Update your server:

    sudo apt-get update && apt-get upgrade
    
  4. Ruby comes with some pre-made scripts to get you started. One of these is a blog. To begin with the blog example, use the following command:

    rails new blog
    

    This creates a new Rails application called Blog in the blog directory.

  5. Move into the blog directory:

    cd blog
    
  6. Start the built in server with the following command, replacing the IP address with your Linode’s IP address:

    rails server --binding=198.51.100.0
    
    Warning: Running `gem pristine --all` to regenerate your installed gemspecs (and deleting then reinstalling your bundle if you use bundle --path) will improve the startup performance of Spring.
    => Booting WEBrick
    => Rails 4.2.7.1 application starting in development on http://198.51.100.0:3000
    => Run `rails server -h` for more startup options
    => Ctrl-C to shutdown server
    [2020-03-11 14:17:16] INFO  WEBrick 1.3.1
    [2020-03-11 14:17:16] INFO  ruby 2.3.3 (2016-11-21) [x86_64-linux-gnu]
    [2020-03-11 14:17:16] INFO  WEBrick::HTTPServer#start: pid=3089 port=3000
  7. You can visit your application by visiting the address in the browser.

  8. Exit the server process with Ctrl+C.

Create a Controller and View

A controller will receive requests which are then routed and served by various actions. A view displays information.

  1. Create a controller called Welcome and an action called index:

    rails generate controller Welcome index
    
    create  app/controllers/welcome_controller.rb
    route   get 'welcome/index'
    invoke  erb
    create    app/views/welcome
    create    app/views/welcome/index.html.erb
    invoke  test_unit
    create    test/controllers/welcome_controller_test.rb
    invoke  helper
    create    app/helpers/welcome_helper.rb
    invoke    test_unit
    invoke  assets
    invoke    coffee
    create      app/assets/javascripts/welcome.coffee
    invoke    scss
    create      app/assets/stylesheets/welcome.scss
  2. With the text editor of your choice, edit the file app/views/welcome/index.html.erb and replace the contents with the following:

    File: app/views/welcome/index.html.erb
    1
    
    <h1>Hello, World! This is Ruby on Rails!</h1>
  3. Tell Rails where to find the document root. Edit the file config/routes.rb, find and uncomment the line root as shown:

    File: config/routes
    1
    2
    3
    4
    5
    6
    7
    8
    9
    
    Rails.application.routes.draw do
      get 'welcome/index'
    
    ...
    
      root 'welcome#index'
    
    ...
    end
  4. Start the server again:

    rails server --binding=198.51.100.0
    

    You should see your new welcome page in the web browser.

For more information on setting up a more substantial application, refer to the Ruby on Rails Getting Started Guide.

Next Steps

Note
Currently, Linode does not manage software and systems updates for Marketplace Apps. It is up to the user to perform routine maintenance on software deployed in this fashion.

For more on Ruby on Rails, checkout the following guides:

More Information

You may wish to consult the following resources for additional information on this topic. While these are provided in the hope that they will be useful, please note that we cannot vouch for the accuracy or timeliness of externally hosted materials.

This page was originally published on


Your Feedback Is Important

Let us know if this guide was helpful to you.