What's the contents of your apache config and what does the output of iptables -L -n -v show?

Thank you for replying promptly, Obs,

Here it goes:

iptables -L -n -v

Chain INPUT (policy ACCEPT 3078K packets, 789M bytes)

pkts bytes target prot opt in out source destination

Chain FORWARD (policy ACCEPT 0 packets, 0 bytes)

pkts bytes target prot opt in out source destination

Chain OUTPUT (policy ACCEPT 3193K packets, 473M bytes)

pkts bytes target prot opt in out source destination

Regarding Apache config, here goes my default-ssl file under /etc/apache2/sites-enabled directory:

 <ifmodule mod_ssl.c=""><virtualhost _default_:443="">ServerAdmin xxxxxxxxx@mydomain

    DocumentRoot /var/www
     <directory>Options FollowSymLinks
        AllowOverride None</directory> 
     <directory var="" www="">Options Indexes FollowSymLinks MultiViews
        AllowOverride None
        Order allow,deny
        allow from all</directory> 

    ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/
     <directory "="" usr="" lib="" cgi-bin"="">AllowOverride None
        Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch
        Order allow,deny
        Allow from all</directory> 

    ErrorLog ${APACHE_LOG_DIR}/error.log

    # Possible values include: debug, info, notice, warn, error, crit,
    # alert, emerg.
    LogLevel warn

    CustomLog ${APACHE_LOG_DIR}/ssl_access.log combined

    Alias /doc/ "/usr/share/doc/"
     <directory "="" usr="" share="" doc="">Options Indexes MultiViews FollowSymLinks
        AllowOverride None
        Order deny,allow
        Deny from all
        Allow from 127.0.0.0/255.0.0.0 ::1/128</directory> 

    #   SSL Engine Switch:
    #   Enable/Disable SSL for this virtual host.
    SSLEngine on

    #   A self-signed (snakeoil) certificate can be created by installing
    #   the ssl-cert package. See
    #   /usr/share/doc/apache2.2-common/README.Debian.gz for more info.
    #   If both key and certificate are stored in the same file, only the
    #   SSLCertificateFile directive is needed.
        SSLCertificateFile /etc/apache2/apache.pem
    #   SSLCertificateFile    /etc/ssl/certs/ssl-cert-snakeoil.pem
    #   SSLCertificateKeyFile /etc/ssl/private/ssl-cert-snakeoil.key

    #   Server Certificate Chain:
    #   Point SSLCertificateChainFile at a file containing the
    #   concatenation of PEM encoded CA certificates which form the
    #   certificate chain for the server certificate. Alternatively
    #   the referenced file can be the same as SSLCertificateFile
    #   when the CA certificates are directly appended to the server
    #   certificate for convinience.
    #SSLCertificateChainFile /etc/apache2/ssl.crt/server-ca.crt

    #   Certificate Authority (CA):
    #   Set the CA certificate verification path where to find CA
    #   certificates for client authentication or alternatively one
    #   huge file containing all of them (file must be PEM encoded)
    #   Note: Inside SSLCACertificatePath you need hash symlinks
    #         to point to the certificate files. Use the provided
    #         Makefile to update the hash symlinks after changes.
    #SSLCACertificatePath /etc/ssl/certs/
    #SSLCACertificateFile /etc/apache2/ssl.crt/ca-bundle.crt

    #   Certificate Revocation Lists (CRL):
    #   Set the CA revocation path where to find CA CRLs for client
    #   authentication or alternatively one huge file containing all
    #   of them (file must be PEM encoded)
    #   Note: Inside SSLCARevocationPath you need hash symlinks
    #         to point to the certificate files. Use the provided
    #         Makefile to update the hash symlinks after changes.
    #SSLCARevocationPath /etc/apache2/ssl.crl/
    #SSLCARevocationFile /etc/apache2/ssl.crl/ca-bundle.crl

    #   Client Authentication (Type):
    #   Client certificate verification type and depth.  Types are
    #   none, optional, require and optional_no_ca.  Depth is a
    #   number which specifies how deeply to verify the certificate
    #   issuer chain before deciding the certificate is not valid.
    #SSLVerifyClient require
    #SSLVerifyDepth  10

    #   Access Control:
    #   With SSLRequire you can do per-directory access control based
    #   on arbitrary complex boolean expressions containing server
    #   variable checks and other lookup directives.  The syntax is a
    #   mixture between C and Perl.  See the mod_ssl documentation
    #   for more details.
    # <location>#SSLRequire (    %{SSL_CIPHER} !~ m/^(EXP|NULL)/ \
    #            and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \
    #            and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \
    #            and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \
    #            and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20       ) \
    #           or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/
    #</location>

    #   SSL Engine Options:
    #   Set various options for the SSL engine.
    #   o FakeBasicAuth:
    #     Translate the client X.509 into a Basic Authorisation.  This means that
    #     the standard Auth/DBMAuth methods can be used for access control.  The
    #     user name is the `one line' version of the client's X.509 certificate.
    #     Note that no password is obtained from the user. Every entry in the user
    #     file needs this password: `xxj31ZMTZzkVA'.
    #   o ExportCertData:
    #     This exports two additional environment variables: SSL_CLIENT_CERT and
    #     SSL_SERVER_CERT. These contain the PEM-encoded certificates of the
    #     server (always existing) and the client (only existing when client
    #     authentication is used). This can be used to import the certificates
    #     into CGI scripts.
    #   o StdEnvVars:
    #     This exports the standard SSL/TLS related `SSL_*' environment variables.
    #     Per default this exportation is switched off for performance reasons,
    #     because the extraction step is an expensive operation and is usually
    #     useless for serving static content. So one usually enables the
    #     exportation for CGI and SSI requests only.
    #   o StrictRequire:
    #     This denies access when "SSLRequireSSL" or "SSLRequire" applied even
    #     under a "Satisfy any" situation, i.e. when it applies access is denied
    #     and no other module can change it.
    #   o OptRenegotiate:
    #     This enables optimized SSL connection renegotiation handling when SSL
    #     directives are used in per-directory context.
    #SSLOptions +FakeBasicAuth +ExportCertData +StrictRequire
     <filesmatch "\.(cgi|shtml|phtml|php)$"="">SSLOptions +StdEnvVars</filesmatch> 
     <directory usr="" lib="" cgi-bin="">SSLOptions +StdEnvVars</directory> 

    #   SSL Protocol Adjustments:
    #   The safe and default but still SSL/TLS standard compliant shutdown
    #   approach is that mod_ssl sends the close notify alert but doesn't wait for
    #   the close notify alert from client. When you need a different shutdown
    #   approach you can use one of the following variables:
    #   o ssl-unclean-shutdown:
    #     This forces an unclean shutdown when the connection is closed, i.e. no
    #     SSL close notify alert is send or allowed to received.  This violates
    #     the SSL/TLS standard but is needed for some brain-dead browsers. Use
    #     this when you receive I/O errors because of the standard approach where
    #     mod_ssl sends the close notify alert.
    #   o ssl-accurate-shutdown:
    #     This forces an accurate shutdown when the connection is closed, i.e. a
    #     SSL close notify alert is send and mod_ssl waits for the close notify
    #     alert of the client. This is 100% SSL/TLS standard compliant, but in
    #     practice often causes hanging connections with brain-dead browsers. Use
    #     this only for browsers where you know that their SSL implementation
    #     works correctly.
    #   Notice: Most problems of broken clients are also related to the HTTP
    #   keep-alive facility, so you usually additionally want to disable
    #   keep-alive for those clients, too. Use variable "nokeepalive" for this.
    #   Similarly, one has to force some clients to use HTTP/1.0 to workaround
    #   their broken HTTP/1.1 implementation. Use variables "downgrade-1.0" and
    #   "force-response-1.0" for this.
    BrowserMatch "MSIE [2-6]" \
        nokeepalive ssl-unclean-shutdown \
        downgrade-1.0 force-response-1.0
    # MSIE 7 and newer should be able to use keepalive
    BrowserMatch "MSIE [17-9]" ssl-unclean-shutdown</virtualhost></ifmodule> 

Let me know if you need to read the contents of a specific apache config file.

Thanks.

It's not the firewall since you don't have anything blocked, what's the contents of /etc/apache2/ports.conf it should look something like this

NameVirtualHost *:80
Listen 80

 <ifmodule mod_ssl.c=""># If you add NameVirtualHost *:443 here, you will also have to change
    # the VirtualHost statement in /etc/apache2/sites-available/default-ssl
    # to <virtualhost *:443=""># Server Name Indication for SSL named virtual hosts is currently not
    # supported by MSIE on Windows XP.
    Listen 443</virtualhost></ifmodule> 

 <ifmodule mod_gnutls.c="">Listen 443</ifmodule> 

I assume you've run a2enmod ssl and restarted apache

Appearantly https is only enabled at localhost. I'll make my ports.conf looks like yours.

cat ports.conf

# If you just change the port or add more ports here, you will likely also
# have to change the VirtualHost statement in
# /etc/apache2/sites-enabled/000-default
# This is also true if you have upgraded from before 2.2.9-3 (i.e. from
# Debian etch). See /usr/share/doc/apache2.2-common/NEWS.Debian.gz and
# README.Debian.gz

NameVirtualHost *:80
Listen 80

 <ifmodule mod_ssl.c=""># If you add NameVirtualHost *:443 here, you will also have to change
    # the VirtualHost statement in /etc/apache2/sites-available/default-ssl
    # to <virtualhost *:443=""># Server Name Indication for SSL named virtual hosts is currently not
    # supported by MSIE on Windows XP.
    Listen 127.0.0.1:443</virtualhost></ifmodule> 

 <ifmodule mod_gnutls.c="">Listen 127.0.0.1:443</ifmodule> 

That should do it, you'll then want to sort out getting your certificate in place if you haven't already, read this guide http://library.linode.com/web-servers/a … an-5-lenny">http://library.linode.com/web-servers/apache/ssl-guides/debian-5-lenny (it's for lenny but should work on squeeze)

Thank you… just edited ports.conf and worked like a charm.

# cat /etc/apache2/ports.conf 
# If you just change the port or add more ports here, you will likely also
# have to change the VirtualHost statement in
# /etc/apache2/sites-enabled/000-default
# This is also true if you have upgraded from before 2.2.9-3 (i.e. from
# Debian etch). See /usr/share/doc/apache2.2-common/NEWS.Debian.gz and
# README.Debian.gz

NameVirtualHost *:80
Listen 80

 <ifmodule mod_ssl.c=""># If you add NameVirtualHost *:443 here, you will also have to change
    # the VirtualHost statement in /etc/apache2/sites-available/default-ssl
    # to <virtualhost *:443=""># Server Name Indication for SSL named virtual hosts is currently not
    # supported by MSIE on Windows XP.
    Listen 443</virtualhost></ifmodule> 

 <ifmodule mod_gnutls.c="">Listen 443</ifmodule>